https://www.yakotec.com
Contact YAKO
menu
banner
Products
Home /Open-Loop /

2 Phase Open-loop Stepper Drive

 /YKD2608E 2 Phase Open Loop Stepper Motor Driver
YKD2608E Stepper Motor Driver

YKD2608E 2 Phase Open Loop Stepper Motor Driver

YKD2608E open loop stepper motor driver feature for 32-bit DSP control, low noise and superior vibration performance. Smooth and accurate current control, effectively reduce motor heating

  • Brand:

    Yako

  • Item no.:

    YKD2608E

  • Payment:

    100% T/T payment before delivery

  • Product origin:

    Made in China

  • Product weight:

    0.65kg

  • Lead Time:

    Confirm the PO, normally 7 workdays.
Inquiry now
  • Product Detail

YKD2608E 2 Phase Open Loop Stepper Motor Driver

YKD2608E open loop stepper motor driver feature for 32-bit DSP control, low noise and superior vibration performance. Smooth and accurate current control, effectively reduce motor heating


Features:

  • 32-bit DSP control, low noise and superior vibration performance
  • 16 constant torque microstep setting, up to 256 microsteps
  • Smooth and accurate current control, effectively reduce motor heating
  • The highest pulse response frequency is 400KHz
  • When the pulse stops over 200ms, the motor current is halved
  • Excellent smoothness in low frequency microsteps
  • Optically isolated differential signal input, strong anti-interference ability
  • Drive current is adjustable below 6.0A
  • Voltage input range: AC18~80V
  • With over voltage, under voltage etc. fault protection
  • Small size, volume 151*94*54 (mm³), weight 0.65kg
  • Suitable for 57-86mm(NEMA23-34) 2 phase open-loop stepper motors.
  • Compared with the standard version, enhanced version adds the
  • following 6 functions: Pulse smoothing, MF function selection, pulse
  • filter, polarity selection, pulse mode, self-test pulse 5HKz


Application: 

Mainly used in engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment, packaging equipment.


Dimensions:


YKD2608E Microstep Setting:


YKD2608E Current Setting:


Terminal Introduction:

Symbol

Function

Specification

PWR

Power indicator

When power on, the green indicator lights up.

O.C

Fault indicator

When over current, under voltage or over voltage, the red indicator lights up

DR-

SW13=OFF, it’s direction control signal

Used to change motor direction. Input resistance 220Ω, requirements: low level 0~0.5V, high level 4~5V,

SW13=ON, it’s CCW pulse signal

Effects on falling edge, the motor moves a step when the pulse goes from high to

low. The input resistance is 220Ω. It requires: low level 0~0.5V, high level 4~5V, pulse width>2.5us.

DR+

Input signal +

Connect with power supply, 5V~24V can drive, need to connect a current limiting resistor with DR- when >5V

PU-

SW13=OFF, it’s pulse signal

Effects on falling edge, the motor moves a step when the pulse goes from high to low. The input resistance is 220Ω. It requires: low level 0~0.5V, high level 4~5V, pulse width>2.5us.

SW13=ON, it’s CW pulse signal

PU+

Input signal +

Connect with power supply, 5V~24V can drive, need to connect a current limiting resistor with PUL- when >5V

MF-

Motor free signal -

When effective (low level), the motor coil current is turned off, the driver stops working and the motor is free.

MF+

Motor free signal +

Connect with 5V power supply, 5V~24V can drive, need to connect a current limiting resistor when >5V

+V

Power supply+

AC18~80/DC24~110V

-V

Power supply-

+A,-A

Motor connection

+B,-B


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Stepper Motor Drive Controller
YKD2822M 2 Phase Digital Open-Loop Stepper Motor Drive Controller
YKD2822M is high performance digital step drive based on YAKO's new 32-bit DSP technology. It's suitable for 86-130mm(NEMA34-57) 2 phase open-loop stepper motors.
Open-Loop Stepper Drive Controller
YKD2405PA 2 Phase Open-Loop Stepper Drive 32-bit DSP Control
YKD2405PA open-loop stepper drive suitable for 42/57/86mm(NEMA17/23/34) 2 phase open-loop stepper motors.
Open-Loop Stepper Drive
YKD2811M 2 Phase Open-Loop Stepper Drive AC18~80V
YKD2811M open-loop stepper drive feature for 32-bit DSP control, low noise and superior vibration performance, with over voltage, under voltage etc. fault protection.
YKA2811MA Stepper Drive
YKA2811MA High Performance 2 Phase Open-Loop Stepper Drive
YKA2811MA open-loop stepper drive, adjustable drive current range from 0.5A/phase - 8A/phase; protection of overvoltage, overheat and overcurrent.
Open-Loop Stepper Drive
YKD2305M 2 Phase Open-Loop Stepper Drive
YKD2305M is high performance digital step driver based on YAKO’s new 32-bit DSP technology. It’s designed for various models of two phase 42~60mm (NEMA 17~24) hybrid stepper motors which current are below 3A.
Open-Loop Stepper Drive
YKD2405MC 2 Phase Open Loop Stepper Drive DC20~50V
YKD2405MC open loop stepper drive optically isolated differential signal input, strong anti-interference ability, suitable for 42~86mm(NEMA17~34) 2 phase open-loop stepper motors.
Open-Loop Stepper Driver
YKD2608MC 2 Phase Open-Loop Stepper Drive
2 Phase Open-Loop Stepper Drive YKD2608MC feature for 32-bit DSP control, low noise and superior vibration performance 16, excellent smoothness in low frequency microsteps.
2 Phase Open-Loop Stepper Drive
YKD2608MH 2 Phase Open-Loop Stepper Drive
YKD2608MH open-loop stepper drive suitable for 86-130mm(NEMA34-57) 2 phase open-loop stepper motors. Mainly used in kinds machines and equipment.
News letter
Join our mailing list, you will get new product release and event information as soon as possible later
Contact Us
Shenzhen YAKO Automation Technology Co., Ltd

© Copyright 2025 Shenzhen YAKO Automation Technology Co., Ltd All Rights Reserved.

Sitemap | XML |
IPv6 network supported
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp