https://www.yakotec.com
Contact YAKO
menu
banner
Products
Home /Open-Loop /

3 Phase Open-loop Stepper Drive

 /YKD3506M Yako 3 Phase Open-Loop Stepper Motor Drive
Open-Loop Stepper Drive

YKD3506M Yako 3 Phase Open-Loop Stepper Motor Drive

YKD3506M adopts a servo-like control circuit, which can drive the motor at low speed with almost no vibration and noise.

  • Brand:

    Yako

  • Item no.:

    YKD3506M

  • Payment:

    100% T/T payment before delivery

  • Product origin:

    Made in China

  • Product weight:

    0.6kg

  • Lead Time:

    Normally 7 workdays
Inquiry now
  • Product Detail

YKD3506M Yako 3 Phase Open-Loop Stepper Motor Drive


Our three-phase stepper motor drives are controlled by a new generation of DSP technology. Driving voltage: 20-50V DC, maximum driving current 5.5A. The parameter self-tuning function is used internally, which can automatically generate the best parameters for different motors without manual adjustment, so that the motor performance can be optimal.


Features:

  • 32-bit DSP control, low noise and superior vibration performance
  • 16 constant torque microstep setting, up to 200 microsteps
  • Smooth and accurate current control, effectively reduce motor heating
  • The highest pulse response frequency is 200KHz
  • When the pulse stops over 200ms, the motor current is halved
  • Excellent smoothness in low frequency microsteps
  • Optically isolated differential signal input, strong anti-interference ability
  • Drive current is adjustable below 5.5A
  • Voltage input range: DC20~50V
  • With over voltage, under voltage etc. fault protection
  • Small size, volume 118*76*33 (mm³), weight 0.6kg
  • Suitable for 42-86mm(NEMA17-34) 3 phase open-loop stepper motors


Application: 

Mainly used in laser cutting machine, laser welding machine, laser marking machine, locking screw machine, medical equipment, robot, dispensing machine, electronic equipment, engraving machine.


Dimensions


YKD3506M Microstep Setting

SW4:OFF=Half Current

       ON=Full Current

YKD3506M Current Setting


Terminal Introduction

Symbol

Function

Specification

PWR

Power indicator

When power on, the green indicator lights up.

ALARM

Fault indicator

When over current, under voltage or over voltage, the red indicator lights up.

PU+

Pulse signal +

Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with PU- when >5V

PU—

Pulse signal -

Effects on falling edge, the motor moves a step when the pulse goes from high to low. The input resistance is 220Ω. It requires: low level 0~0.5V, high level 4~5V, pulse width>2.5us.

DR+

Direction signal +

Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with DR- when >5V

DR—

Direction signal -

Used to change motor direction, requirements: low level 0~0.5V, high level 4~5V,pulse width>2.5us.

MF+

Motor free signal +

Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with MF- when >5V

MF+

Motor free signal -

When effective (low level), the motor coil current is turned off and motor free

—V

Power supply-

DC20- 50V

+V

Power supply-

U

Motor connection

 

V

W

N

Reserved





Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
3 Phase Stepper Drive
YKD3422M 3 Phase Open-Loop Stepper Drive DC20~60V
YKD3422M 3 phase open-loop stepper drive suitable for 42-86mm(NEMA17-34) 3 phase open-loop stepper motors. Mainly used in kinds applications.
Open-Loop Stepper Motor Drive
YKD3505M Yako 3 Phase Open-Loop DSP Stepper Drive
YKD3505M is a high-performance digital stepper driver based on YAKO's new 32-bit DSP technology.
Digital DSP Stepper Driver
YKD3722M Yako 3 Phase Open-Loop Digital DSP Stepper Driver
YKD3722M is a high performance 3 phase stepper driver which is based on new 32 bit DSP technology, driver voltage AC110~220V.
3 Phase Open-Loop Stepper Drive
YKD3522M Yako AC110~220V 3 Phase Open-Loop Stepper Drive
The YKD3522M is a three-phase NEMA34-57 stepper motor. It is made of high-quality materials for smooth movement, high precision, and extremely low noise and heat generation.
Open-Loop Stepper Drive
YKD3606M High Quality Yako 3 Phase Digital Open-Loop Stepper Drive
YKD3606M series stepping driver is based on a new 32-bit DSP platform, designed with micro-stepping technology and PID current control algorithm, which comprehensively surpasses the performance of ordinary analog stepping drivers
DSP Open-Loop Stepper Drive
YKD3608MH Yako Professional Economic 3 Phase DSP Open-Loop Stepper Drive
YKD3608MH is a high-performance stepping driver based on new 32-bit DSP technology. The driving voltage is AC18~80V, and the current is lower than 5.9A.
110mm Open-loop Stepper Motor
110mm 2 Phase Open-loop Stepper Motor
110mm Series 2 Phase Open-loop Stepper Motor  Step accuracy: 5% Temperature: 80℃Max Ambient temperature: -20℃-+50℃ Insulation resistance: 100MΩ Min 500VDC Pressure resistance: 500VAC 1 minute Radial runout: Maximum 0.02mm (450g load) Axial runout: Maximum 0.08mm (450g load) Specification Model Step Angle (°） Motor Lenth (L) Holding Torque (N.m) Rated Current (A) Resistance (Ω） Inductance (mH) Rotor Inertia (g.cm²） Weight (kg) Motor Leads YK110HB115-06A     1.8 115 12 6.0 0.44 4.9 7200 6.0 4 YK110HB150-06A 1.8 150 18 6.0 0.8 9.4 10900 8.4 4 YK110HB201-08A 1.8 201 27 8.0 0.6 11.0 16200 11.0 4 Dimensions Dimensions Model  Shaft Diameter D(mm)  Shaft Type (mm) Shaft Length L1 (mm)    YK110HB115-06A  16 Key 4*4*20 35 YK110HB150-06A  16 Key 4*4*20 35 YK110HB201-08A  16 Key 4*4*20 35 Motor connection
86mm 220V Close-loop Stepper Motor
86mm 2 Phase Close-loop Stepper Motor
86mm Series 2 Phase Close-loop Stepper Motor  Step accuracy: 5% Temperature: 80℃Max Ambient temperature: -20℃-+50℃ Insulation resistance: 100MΩ Min 500VDC Pressure resistance: 500VAC 1 minute Radial runout: Maximum 0.02mm (450g load) Axial runout: Maximum 0.08mm (450g load) Specification Model Step Angle (°） Motor Lenth (L) Holding Torque (N.m) Rated Current (A) Resistance (Ω） Inductance (mH) Rotor Inertia (g.cm²） Weight (kg) Motor Leads YK286EC80A1 1.8 97 4.2 6.0 0.34 2.7 1800 2.4 4 YK286EC118A1 1.8 140 8.2 6.0 0.52 4.7 3200 4.0 4 YK286EC156A1 1.8 174 12.0 6.0 0.7 9.2 5400 5.4 4 Suitable drive model: SSD2608H Dimensions Dimensions Model Shaft Diameter D (mm) Shaft Type (mm) Shaft Length L1 (mm)  YK286EC80A1 14 Key 5*5*25 40 YK286EC118A1 14 Key 5*5*25 40 YK286EC156A1 14 Key 5*5*25 40 Encoder Wiring Black GND Red +5V Blue/White EA- Blue EA+ Orange/White EB- Orange EB+ *Motor / Encoder cable: 0.3m Motor standard cable: 1.5m (optional 2m/3m) Encoder standard cable: 1.5m (optional 2m/3m) Motor connection
News letter
Join our mailing list, you will get new product release and event information as soon as possible later
Contact Us
Shenzhen YAKO Automation Technology Co., Ltd

© Copyright 2024 Shenzhen YAKO Automation Technology Co., Ltd All Rights Reserved.

Sitemap | XML |
IPv6 network supported
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp