Tel : +86 18148038996
Email : zhangwenying@yankong.com
Brand:
YakoItem no.:
YKD3606MPayment:
100% T/T payment before deliveryProduct origin:
Made in ChinaProduct weight:
0.65kgLead Time:
Normally 7 workdays
YKD3606M High Quality Yako 3 Phase Digital Open-Loop Stepper Drive
Our high-quality three-phase digital open-loop stepper driver can better meet different types of load applications, improve the stability of the motor in various speed ranges, make the motor deceleration process smoother, low-speed vibration control, and reduce the low-speed vibration amplitude of the motor 80%.
Features:
Application:
Mainly used in CNC machine tools, engraving machines, packaging equipment, woodworking machinery, laser cutting machines, textile equipment, ceramic equipment, electronic equipment constant speed applications.
Dimensions
YKD3606M Microstep Setting
Terminal Introduction
Symbol |
Function |
Specification |
PWR |
Power indicator |
When power on, the green indicator lights up. |
ALM |
Fault indicator |
When over current, under voltage or over voltage, the red indicator lights up. |
PU+ |
Pulse signal + |
Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with PU- when >5V |
PU - |
SW12=OFF, it’s pulse signal |
Effects on falling edge, the motor moves a step when the pulse goes from high to low. The input resistance is 220Ω. It requires: low level 0~0.5V, high level 4~5V, pulse width>2.5us. |
SW12=ON, it’s CW pulse signal |
||
DR+ |
Input signal + |
Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with DR- when >5V |
DR - |
SW12=OFF, it’s direction control signal |
sed to change motor direction, requirements: low level 0~0.5V, high level 4~5V |
SW12=ON, it’s CCW pulse signal |
Effects on falling edge, the motor moves a step when the pulse goes from high to low. The input resistance is 220Ω. It requires: low level 0~0.5V, high level 4~5V, pulse width>2.5us. |
|
MF+ |
Input signal + |
Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with MF- when >5V |
MF - |
Motor free signal |
When effective (low level), the motor coil current is turned off and motor free |
TM+ |
Home output signal + |
The motor coil is energized at the origin to be active; opto-isolated output (high level) |
TM- |
Home output signal - |
TM+ connect with the resistor, TM- connect to output GND. Maximum drive current 50mA, and maximum voltage 50V. |
+V |
Power supply + |
DC20-60V |
-V |
Power supply - |
|
U |
Motor connection |
|
V |
||
W |