banner

YKE2204M 2 Phase Open-Loop Stepper Drive DC18~36V

YKE2204M open-loop stepper drive feature for 32-bit DSP control, low noise and superior vibration performance, with over voltage, under voltage etc. fault protection.
  • Item no.:

    YKE2204M
  • Payment:

    100% T/T payment before delivery
  • Product origin:

    Made in China
  • Product weight:

    0.12kg
  • Lead Time:

    Confirm the PO, normally 7 workdays.
  • Product Detail

YKE2204M 2 Phase Open-Loop Stepper Drive DC18~36V

YKE2204M open-loop stepper drive feature for 32-bit DSP control, low noise and superior vibration performance, with over voltage, under voltage etc. fault protection.


Features:

  • 32-bit DSP control, good stability and superior vibration performance
  • 4 constant torque microstep setting, up to 32 microsteps
  • Smooth and accurate current control, effectively reduce motor heating
  • The highest pulse response frequency is 100KHz
  • When the pulse stops over 250ms, the motor current is halved
  • Excellent smoothness in low-speed and low frequency microsteps
  • Optically isolated differential signal input, strong anti-interference ability
  • Drive current is adjustable below 2.2A
  • Voltage input range: DC18~36V
  • With over voltage, under voltage etc. fault protection
  • Small size, volume 86*55*21 (mm³), weight 0.12kg
  • Suitable for 42mm(NEMA17) 2 phase open-loop stepper motors


Application: 

Mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment.


Dimensions:


YKE2204M Current Setting:


YKE2204M Microstep Setting:


Terminal Introduction:

Symbol

Function

Specification

PWR

Power indicator

When power on, the green indicator lights up. 

ALARM

Fault indicator

When over current, under voltage or over voltage, the red indicator lights up

PU

Pulse signal
photoelectric isolation -

Effects on falling edge, the motor moves a step when the pulse goes from
high to low. Built-in input resistance 384Ω, requirements: low level 0-0.5V,
high level is the same as common anode, pulse width >5us

 DR

Direction signal
photoelectric isolation -

Used to change motor direction. Built-in input resistance 384Ω,
requirements: low level 0-0.5V, high level is the same as common anode,
pulse width >5us

+(5V)

Control signal
common anode +

3.3V-24V can drive, the current limiting resistor must be added when
voltage>5V. Need to connect with resistor of 2KΩ when voltage is 24V, and
connect with 820Ω when it's 12V


MF

 Motor free signal
optical isolation-


When effective (low level), the motor coil current is turned off and the
motor is free. Built-in input resistance 384Ω, requirements: low level 0-
0.5V, high level is the same as common anode, pulse width >5us

-V

Power supply-

DC18-36V, DC input, power supply>100W

+V

Power supply +

+A,-A

 

Motor connection

+B,-B


Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Stepper Motor Drive Controller
YKD2822M 2 Phase Digital Open-Loop Stepper Motor Drive Controller
YKD2822M is high performance digital step drive based on YAKO's new 32-bit DSP technology. It's suitable for 86-130mm(NEMA34-57) 2 phase open-loop stepper motors.
YKD2608E Stepper Motor Driver
YKD2608E 2 Phase Open Loop Stepper Motor Driver
YKD2608E open loop stepper motor driver feature for 32-bit DSP control, low noise and superior vibration performance. Smooth and accurate current control, effectively reduce motor heating
Open-Loop Stepper Drive Controller
YKD2405PA 2 Phase Open-Loop Stepper Drive 32-bit DSP Control
YKD2405PA open-loop stepper drive suitable for 42/57/86mm(NEMA17/23/34) 2 phase open-loop stepper motors.
Open-Loop Stepper Drive
YKD2811M 2 Phase Open-Loop Stepper Drive AC18~80V
YKD2811M open-loop stepper drive feature for 32-bit DSP control, low noise and superior vibration performance, with over voltage, under voltage etc. fault protection.
YKA2811MA Stepper Drive
YKA2811MA High Performance 2 Phase Open-Loop Stepper Drive
YKA2811MA open-loop stepper drive, adjustable drive current range from 0.5A/phase - 8A/phase; protection of overvoltage, overheat and overcurrent.
Open-Loop Stepper Drive
YKD2305M 2 Phase Open-Loop Stepper Drive
YKD2305M is high performance digital step driver based on YAKO’s new 32-bit DSP technology. It’s designed for various models of two phase 42~60mm (NEMA 17~24) hybrid stepper motors which current are below 3A.
Open-Loop Stepper Drive
YKD2405MC 2 Phase Open Loop Stepper Drive DC20~50V
YKD2405MC open loop stepper drive optically isolated differential signal input, strong anti-interference ability, suitable for 42~86mm(NEMA17~34) 2 phase open-loop stepper motors.
Open-Loop Stepper Driver
YKD2608MC 2 Phase Open-Loop Stepper Drive
2 Phase Open-Loop Stepper Drive YKD2608MC feature for 32-bit DSP control, low noise and superior vibration performance 16, excellent smoothness in low frequency microsteps.
News letter
Join our mailing list, you will get new product release and event information as soon as possible later
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp